The New design will no longer have the BULLSEYE or Stars cut out of it. I have had too many request to do the shelf without the cut outs because it makes it easier to clean. The new design does have two circles cut out on both sides in the location of the stars to help with heat transfer. (PHOTOS coming shortly)
The New and improved BULLSEYE grill, flip-up side shelf for 2020. This is a must have for any Bullseye grill owner using one of My DRG Custom carts. This gives you an AMAZING 19" x 16" side shelf, perfect for holding all your grilling needs. The shelf is made of 14 gauge steel and powder coated with a high temp FDA approved food grade black metallic powder. The shelf will come complete with all the hardware to attach it to your grill and cart, and three magnetic hooks. If you purchase this shelf after 1/20/2020 your lower A-frame support will come with rivnuts already installed, making this a very easy installation. All you will need to do, (with the help of the included template), drill 3 holes into the lower cooking chamber for the hinge to bolt to. Install the 3 stainless steel bolts. Then install the lower bracket to the rivnuts, and away you go. If you have purchased this shelf for the older version carts. It MUST be one of the carts that is bolted together with the stainless steel 1/4" x 20 bolts. In this installation, you will need to attach the shelf bracket to the cooker, install the support arm to the shelf, with the lower bracket attached to it. Raise the shelf up until it is level with your grill, mark and drill the two holes in the lower A-Frame and bolt it. The first Generation carts, unfortunately were all hand cut out and no two were the same. Therefore I can not in good faith say it will fit on those as intended, so PLEASE keep that in mind when you purchase.